Erstellt vor 4 Jahren

Zuletzt geändert vor 13 Monaten

#2462 new defect

Labor 27948 für 7490 rebootet ständig

Erstellt von: Norelkhan Verantwortlicher:
Priorität: normal Meilenstein: freetz-next
Komponente: kernel Version: devel
Stichworte: Beobachter:
Product Id: 7490 Firmware Version: 12008

Beschreibung

Die neue Labor 27948 für die 7490 baut problemlos, die Box rebootet aber ständig.
Anbei ein Auszug aus dem Syslog vom starten bis zum reboot.

Jan  1 01:00:57 FRITZ syslog.info syslogd started: BusyBox v1.22.1
Jan  1 01:00:57 FRITZ kern.notice kernel: klogd started: BusyBox v1.22.1 (2014-05-10 21:19:25 CEST)
Jan  1 01:00:57 FRITZ kern.notice kernel: [    0.000000] Linux version 2.6.32.61 (hjortmann@EmbeddedVM) (gcc version 4.8.1 (Buildroot 2013.05) ) #3 SMP Tue May 6 18:18:54 CEST 2014
Jan  1 01:00:57 FRITZ user.notice FREETZMOD: Starting syslogd ... done.
Jan  1 01:00:57 FRITZ kern.warn kernel: [    0.000000] phym = 10000000, mem = 10000000, max_pfn = 00010000
Jan  1 01:00:57 FRITZ kern.warn kernel: [    0.000000] Reserving memory for CP1 @0xb0000000, size 0x00000000
Jan  1 01:00:57 FRITZ kern.err kernel: [    0.000000] [init_avm_kernel_config] AVM Kernel Config (ptr 806be000)
Jan  1 01:00:57 FRITZ kern.err kernel: [    0.000000] [init_avm_kernel_config] AVM Kernel Config: module memory entry
Jan  1 01:00:57 FRITZ kern.info kernel: [    0.000000] bootconsole [early0] enabled
Jan  1 01:00:57 FRITZ kern.info kernel: [    0.000000] CPU revision is: 00019556 (MIPS 34Kc)
Jan  1 01:00:57 FRITZ kern.info kernel: [    0.000000] Determined physical RAM map:
Jan  1 01:00:57 FRITZ kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Jan  1 01:00:57 FRITZ kern.warn kernel: [    0.000000] Zone PFN ranges:
Jan  1 01:00:57 FRITZ kern.warn kernel: [    0.000000]   Normal   0x00000000 -> 0x00010000
Jan  1 01:00:57 FRITZ kern.warn kernel: [    0.000000] Movable zone start PFN for each node
Jan  1 01:00:57 FRITZ kern.warn kernel: [    0.000000] early_node_map[1] active PFN ranges
Jan  1 01:00:57 FRITZ kern.warn kernel: [    0.000000]     0: 0x00000000 -> 0x00010000
Jan  1 01:00:57 FRITZ kern.debug kernel: [    0.000000] On node 0 totalpages: 65536
Jan  1 01:00:57 FRITZ kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 806bd540, node_mem_map 81000000
Jan  1 01:00:57 FRITZ kern.debug kernel: [    0.000000]   Normal zone: 512 pages used for memmap
Jan  1 01:00:57 FRITZ kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Jan  1 01:00:57 FRITZ kern.debug kernel: [    0.000000]   Normal zone: 65024 pages, LIFO batch:15
Jan  1 01:00:57 FRITZ kern.warn kernel: [    0.000000] [module-alloc-by-name] 'modulemem' not in use, use AVM Kernel Config (6705152 bytes, reserved for module mem)
Jan  1 01:00:57 FRITZ kern.err kernel: [    0.000000] [module-alloc] use 0x665000 bytes at 0x81202000
Jan  1 01:00:57 FRITZ kern.warn kernel: [    0.000000] 1 available secondary CPU TC(s)
Jan  1 01:00:57 FRITZ kern.info kernel: [    0.000000] PERCPU: Embedded 7 pages/cpu @8186b000 s5760 r8192 d14720 u65536
Jan  1 01:00:57 FRITZ kern.err kernel: [    0.630000] [avmnet] [avmnet_cfg_init] Driver version: 6.128 - Revision 1496:2607 - Di  6.05.2014 18:18:18 
Jan  1 01:00:57 FRITZ kern.info kernel: [    0.950000] Lantiq PCIe Root Complex driver, version 2.0.0, (c) 2001-2013 Lantiq Deutschland GmbH
Jan  1 01:00:57 FRITZ kern.warn kernel: [    0.960000] bio: create slab <bio-0> at 0
Jan  1 01:00:57 FRITZ kern.info kernel: [    0.960000] ifx_pcie_rc_class_early_fixup port 0: fixed pcie host bridge to pci-pci bridge
Jan  1 01:00:57 FRITZ kern.info kernel: [    0.970000] pci 0000:00:00.0: PME# supported from D0 D3hot
Jan  1 01:00:57 FRITZ kern.info kernel: [    0.970000] pci 0000:00:00.0: PME# disabled
Jan  1 01:00:57 FRITZ kern.debug kernel: [    0.970000] pci 0000:01:00.0: reg 10 64bit mmio: [0x000000-0x001fff]
Jan  1 01:00:57 FRITZ kern.info kernel: [    1.440000] nbd: registered device at major 43
Jan  1 01:00:57 FRITZ kern.warn kernel: [    1.460000] Generic platform RAM MTD, (c) 2004 Simtec Electronics
Jan  1 01:00:57 FRITZ kern.info kernel: [    1.460000] Platform NOR MTD, (c) AVM 2010
Jan  1 01:00:57 FRITZ kern.warn kernel: [    1.470000] [HSNAND] Hardware-ECC activated
Jan  1 01:00:57 FRITZ kern.info kernel: [    1.470000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xdc (Micron NAND 512MiB 3,3V 8-bit)
Jan  1 01:00:57 FRITZ kern.info kernel: [    1.480000] Scanning device for bad blocks
Jan  1 01:00:57 FRITZ kern.notice kernel: [    1.900000] Creating 6 MTD partitions on "ifx_hsnand":
Jan  1 01:00:57 FRITZ kern.notice kernel: [    1.900000] 0x000000000000-0x000000400000 : "reserved-kernel"
Jan  1 01:00:57 FRITZ kern.err kernel: [    1.910000] {ifx_mtd_add_notifier} name reserved-kernel
Jan  1 01:00:57 FRITZ kern.err kernel: [    1.920000] {ifx_mtd_add_notifier} name reserved-filesystem
Jan  1 01:00:57 FRITZ kern.notice kernel: [    1.920000] 0x000003400000-0x000003800000 : "kernel"
Jan  1 01:00:57 FRITZ kern.notice kernel: [    1.930000] 0x000003800000-0x000006800000 : "filesystem"
Jan  1 01:00:57 FRITZ kern.info kernel: [    2.130000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Jan  1 01:00:57 FRITZ kern.info kernel: [    2.130000] All bugs added by David S. Miller <davem@redhat.com>
Jan  1 01:00:57 FRITZ kern.warn kernel: [    2.140000] <ifx_fix_timing>
Jan  1 01:00:57 FRITZ kern.warn kernel: [    2.150000] TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)
Jan  1 01:00:57 FRITZ kern.warn kernel: [    2.150000]       mount on mtd7 and mtd8 (double buffering)
Jan  1 01:00:57 FRITZ kern.info kernel: [    2.160000] Adam2 environment variables API installed.
Jan  1 01:00:57 FRITZ kern.err kernel: [    2.160000] [simple-profiling]: 2 performance counters implemented, NEW_34K
Jan  1 01:00:57 FRITZ kern.info kernel: [    2.170000] Enable Performance Counter 0 for Data cache load/stores (User-Mode enabled Supervisor-Mode enabled Kernel-Mode enabled Exeption-Mode disable)
Jan  1 01:00:57 FRITZ kern.warn kernel: [    6.900000] TFFS Name Table K
Jan  1 01:00:57 FRITZ kern.info kernel: [    6.980000] yaffs: passed flags ""
Jan  1 01:00:57 FRITZ kern.debug kernel: [    6.990000] yaffs: yaffs: Attempting MTD mount of 31.4,"mtdblock4"
Jan  1 01:00:57 FRITZ kern.err kernel: [    8.370000] [module-alloc-by-name] give 0x1a000 bytes at 0x81202000 to module 'led_modul_Fritz_Box_HW185' (0x64b000 bytes left)
Jan  1 01:00:57 FRITZ kern.warn kernel: [    8.380000] led_modul_Fritz_Box_HW185: module license '
Jan  1 01:00:57 FRITZ kern.warn kernel: [    8.380000] ' taints kernel.
Jan  1 01:00:57 FRITZ kern.warn kernel: [    8.390000] Disabling lock debugging due to kernel taint
Jan  1 01:00:57 FRITZ kern.err kernel: [    8.430000] [LED] use GPIO 47 for 'gpio_avm_led_internet'
Jan  1 01:00:57 FRITZ kern.err kernel: [    8.430000] [LED] use GPIO 36 for 'gpio_avm_led_festnetz'
Jan  1 01:00:57 FRITZ kern.err kernel: [    8.440000] [LED] use GPIO 35 for 'gpio_avm_led_wlan'
Jan  1 01:00:57 FRITZ kern.err kernel: [    8.450000] [LED] use GPIO 33 for 'gpio_avm_led_info'
Jan  1 01:00:57 FRITZ kern.err kernel: [    8.450000] [LED] use GPIO 46 for 'gpio_avm_led_info_red'
Jan  1 01:00:57 FRITZ kern.err kernel: [    8.460000] [BUTTON] use GPIO 29 for 'gpio_avm_button_wlan'
Jan  1 01:00:57 FRITZ kern.err kernel: [    8.460000] [BUTTON] use GPIO 1 for 'gpio_avm_button_dect'
Jan  1 01:00:57 FRITZ kern.warn kernel: [    8.470000] [register_bug_debug_table] name='led-modul' 0x8120ef84 - 0x8120ef84
Jan  1 01:00:57 FRITZ kern.warn kernel: [    8.480000] AVM_WATCHDOG: System Init UEberwachung 240 Sekunden
Jan  1 01:00:57 FRITZ kern.err kernel: [    8.850000] [module-alloc-by-name] give 0x2000 bytes at 0x8121c000 to module 'rtc_avm' (0x649000 bytes left)
Jan  1 01:00:57 FRITZ kern.info kernel: [    8.880000] rtc-avm rtc-avm.0: rtc core: registered avm as rtc0
Jan  1 01:00:57 FRITZ kern.err kernel: [    8.880000] [avm-rtc]: avm_rtc_probe: register: ret=0x8f36a400
Jan  1 01:00:57 FRITZ kern.err kernel: [    8.890000] [avm-rtc]: avm_rtc_probe: success
Jan  1 01:00:57 FRITZ kern.warn kernel: [    9.080000] 
Jan  1 01:00:57 FRITZ kern.warn kernel: [   25.540000] capicodec_init()
Jan  1 01:00:57 FRITZ kern.warn kernel: [   25.550000] [capi_codec] support fax
Jan  1 01:00:57 FRITZ kern.err kernel: [   25.620000] [module-alloc-by-name] give 0x44000 bytes at 0x813e5000 to module 'avm_dect' (0x43e000 bytes left)
Jan  1 01:00:57 FRITZ kern.err kernel: [   25.630000] [module-alloc-by-name] 0x44000 bytes used, 0x45f48 bytes expected
Jan  1 01:00:57 FRITZ kern.info kernel: [   25.700000] [pcmlink] configure REG_PCM_CTRL_DECT=0xcba9ed00
Jan  1 01:00:57 FRITZ kern.err kernel: [   25.720000] [module-alloc-by-name] 0x4000 bytes used, 0x483c bytes expected
Jan  1 01:00:57 FRITZ kern.err kernel: [   28.700000] [module-alloc-by-name] give 0x10000 bytes at 0x8142d000 to module 'fat' (0x42a000 bytes left)
Jan  1 01:00:57 FRITZ kern.info kernel: [   30.530000] Bus#1 config: AVM Powermeter changed to 500 mA
Jan  1 01:00:57 FRITZ kern.info kernel: [   30.530000] usb 1-4: configuration #1 chosen from 1 choice
Jan  1 01:00:57 FRITZ kern.warn kernel: [   30.540000] usb 1-4: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
Jan  1 01:00:57 FRITZ kern.warn kernel: [   30.540000] usb 1-4: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
Jan  1 01:00:57 FRITZ kern.warn kernel: [   30.550000] usb 1-4: ep 0x83 - rounding interval to 32768 microframes, ep desc says 0 microframes
Jan  1 01:00:57 FRITZ kern.info kernel: [   33.690000] [AVM_MEI_PowerUpDSLSubsystem] power up 'PPE TC, PPE EMA, LEDC, DFEV1, DFEV0'
Jan  1 01:00:57 FRITZ kern.warn kernel: [   33.720000] spi_clc=0x00000200
Jan  1 01:00:57 FRITZ kern.err kernel: [   33.800000] [module-alloc-by-name] give 0x4b000 bytes at 0x814e4000 to module 'dsl_vr9' (0x338000 bytes left)
Jan  1 01:00:57 FRITZ kern.warn kernel: [   33.960000] [dsl drv] Lantiq CPE API Driver version: DSL CPE API V4.16.5-pd1
Jan  1 01:00:57 FRITZ kern.warn kernel: [   33.970000] [dsl drv] Predefined debug level: 4
Jan  1 01:00:57 FRITZ kern.err kernel: [   34.270000] [module-alloc-by-name] give 0x37000 bytes at 0x8152f000 to module 'ifxmips_ppa_datapath_vr9_e5' (0x301000 bytes left)
Jan  1 01:00:57 FRITZ kern.err kernel: [   34.380000] drivers/net/avm_cpmac/switch/ifx/vr9/ifxmips_ppa_datapath_vr9_e5.c:4124:init_local_variables: [init_local_variables] g_eth_wan_mode=0
Jan  1 01:00:57 FRITZ kern.err kernel: [   34.380000] 
Jan  1 01:00:57 FRITZ kern.warn kernel: [   34.600000]   Family    : VR9
Jan  1 01:00:57 FRITZ kern.warn kernel: [   34.600000]   FW Package: E1
Jan  1 01:00:57 FRITZ kern.warn kernel: [   34.600000]   Release   : 2.11.1
Jan  1 01:00:57 FRITZ kern.warn kernel: [   34.600000] PPE 1 firmware info:
Jan  1 01:00:57 FRITZ kern.warn kernel: [   34.600000]   Version ID: 7.5.2.11.1
Jan  1 01:00:57 FRITZ kern.warn kernel: [   34.600000]   Family    : VR9
Jan  1 01:00:57 FRITZ kern.warn kernel: [   34.600000]   FW Package: D5
Jan  1 01:00:57 FRITZ kern.warn kernel: [   34.600000]   Release   : 2.11.1
Jan  1 01:00:57 FRITZ kern.warn kernel: [   43.720000] [avm_power] eth: port 2 force normal  CON t0
Jan  1 01:00:57 FRITZ kern.info kernel: [   45.580000] ADDRCONF(NETDEV_UP): lan: link is not ready
Jan  1 01:00:57 FRITZ kern.warn kernel: [   45.620000] [avmnet] [avmnet_mcfw_enable] Device eth0 was enabled already
Jan  1 01:00:57 FRITZ kern.info kernel: [   45.630000] device eth0 entered promiscuous mode
Jan  1 01:00:57 FRITZ kern.warn kernel: [   45.640000] [avmnet] [avmnet_mcfw_enable] Device eth1 was enabled already
Jan  1 01:00:57 FRITZ kern.info kernel: [   45.640000] ADDRCONF(NETDEV_UP): eth1: link is not ready
Jan  1 01:00:57 FRITZ kern.warn kernel: [   46.170000] [avmnet] [avmnet_mcfw_enable] Device eth2 was enabled already
Jan  1 01:00:57 FRITZ kern.info kernel: [   46.180000] device eth2 entered promiscuous mode
Jan  1 01:00:57 FRITZ kern.warn kernel: [   46.700000] [avmnet] [avmnet_mcfw_enable] Device eth3 was enabled already
Jan  1 01:00:57 FRITZ kern.info kernel: [   46.700000] ADDRCONF(NETDEV_UP): eth3: link is not ready
Jan  1 01:00:57 FRITZ kern.info kernel: [   46.710000] device eth3 entered promiscuous mode
Jan  1 01:00:57 FRITZ kern.err kernel: [   47.690000] kdsld: kdsld_vcc_preunregister: *
Jan  1 01:00:57 FRITZ kern.info kernel: [   47.730000] ADDRCONF(NETDEV_UP): guest: link is not ready
Jan  1 01:00:57 FRITZ kern.info kernel: [   47.780000] kdsld: nr_ipv4 0 nr_ipv6 0 nr_vpn 0
Jan  1 01:00:57 FRITZ kern.err kernel: [   47.850000] kdsld: kdsld_vcc_preregister: predsl1
Jan  1 01:00:57 FRITZ kern.err kernel: [   47.860000] kdsld: kdsld_vcc_preregister: vcc->ifaces=(null)
Jan  1 01:00:57 FRITZ kern.info kernel: [   47.870000] kdsld: internet: set_rcv_ipaddr: 192.168.1.1
Jan  1 01:00:57 FRITZ kern.debug kernel: [   50.180000] avm_pa: telephony_reduce 65
Jan  1 01:00:57 FRITZ kern.debug kernel: [   50.180000] avm_pa: mswin 300 400
Jan  1 01:00:57 FRITZ kern.info kernel: [   50.180000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jan  1 01:00:57 FRITZ kern.info kernel: [   50.190000] lan: port 1(eth0) entering forwarding state
Jan  1 01:00:57 FRITZ kern.err kernel: [   50.220000] [dma_device_write] auto open tx_chan_no:2
Jan  1 01:00:57 FRITZ kern.err kernel: [   50.990000] [module-alloc-by-name] give 0xa000 bytes at 0x816e7000 to module 'ulpcmlink' (0x176000 bytes left)
Jan  1 01:00:57 FRITZ kern.err kernel: [   51.000000] [module-alloc-by-name] 0xa000 bytes used, 0xa728 bytes expected
Jan  1 01:00:57 FRITZ kern.info kernel: [   51.040000] nla_init
Jan  1 01:00:57 FRITZ kern.info kernel: [   51.040000] nla_init-Success
Jan  1 01:00:57 FRITZ kern.warn kernel: [   51.150000] AVM_WATCHDOG: System Init UEberwachung abgeschlossen (197340 ms noch verfuegbar)
Jan  1 01:00:57 FRITZ kern.info kernel: [   51.210000] rpc_unix_server_thread
Jan  1 01:00:57 FRITZ kern.info kernel: [   51.210000] rpc_unix_server_thread D
Jan  1 01:00:58 FRITZ kern.debug kernel: [   51.250000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_cpuclock: norm_power_rate=100 act_rate=100 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=0 mW
Jan  1 01:00:58 FRITZ kern.debug kernel: [   51.250000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_systemclock: norm_power_rate=100 act_rate=100 mul=0 div=1 offset=2000 NormP=2000 mW -> SumNormP=2000 mW
Jan  1 01:00:58 FRITZ kern.debug kernel: [   51.250000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_dspclock: norm_power_rate=100 act_rate=100 mul=0 div=1 offset=1000 NormP=1000 mW -> SumNormP=3000 mW
Jan  1 01:00:58 FRITZ kern.debug kernel: [   51.250000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_loadrate: norm_power_rate=100 act_rate=97 mul=15 div=1 offset=0 NormP=1500 mW -> SumNormP=4500 mW
Jan  1 01:00:58 FRITZ kern.debug kernel: [   51.250000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_dsl: norm_power_rate=100 act_rate=80 mul=15 div=1 offset=0 NormP=1500 mW -> SumNormP=6000 mW
Jan  1 01:00:58 FRITZ kern.debug kernel: [   51.250000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_dect: norm_power_rate=100 act_rate=0 mul=200 div=78 offset=150 NormP=406 mW -> SumNormP=6406 mW
Jan  1 01:00:58 FRITZ kern.debug kernel: [   51.250000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_analog: norm_power_rate=200 act_rate=0 mul=141 div=10 offset=100 NormP=2920 mW -> SumNormP=9326 mW
Jan  1 01:00:58 FRITZ kern.debug kernel: [   51.250000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_isdnnt: norm_power_rate=100 act_rate=0 mul=1 div=1 offset=0 NormP=100 mW -> SumNormP=9426 mW
Jan  1 01:00:58 FRITZ kern.debug kernel: [   51.250000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_isdnte: norm_power_rate=100 act_rate=0 mul=1 div=1 offset=0 NormP=100 mW -> SumNormP=9526 mW
Jan  1 01:00:58 FRITZ kern.debug kernel: [   51.250000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_host: norm_power_rate=500 act_rate=500 mul=55 div=10 offset=0 NormP=2750 mW -> SumNormP=12276 mW
Jan  1 01:00:58 FRITZ kern.debug kernel: [   51.250000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_host2: norm_power_rate=500 act_rate=0 mul=55 div=10 offset=0 NormP=2750 mW -> SumNormP=15026 mW
Jan  1 01:00:58 FRITZ kern.debug kernel: [   51.250000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_wlan: norm_power_rate=100 act_rate=0 mul=77 div=1 offset=300 NormP=8000 mW -> SumNormP=23026 mW
Jan  1 01:00:58 FRITZ kern.debug kernel: [   51.250000] [avm_power] pm_ressourceinfo_scriptparse: powerdevice_ethernet: norm_power_rate=2267 act_rate=16777247 mul=1 div=1 offset=50 NormP=2317 mW -> SumNormP=25343 mW
Jan  1 01:00:58 FRITZ kern.info kernel: [   51.250000] SysRq : Changing Loglevel
Jan  1 01:00:58 FRITZ kern.warn kernel: [   51.260000] Loglevel set to 4
Jan  1 01:00:58 FRITZ kern.emerg kernel: [   51.610000] AVM_WATCHDOG_ungraceful_release: handle 11 (faxd) still registered!
Jan  1 01:00:58 FRITZ kern.warn kernel: [   51.620000] [0]system-load 2  loadavg 1.89 0.48 0.16 - 101 tasks:34 % curr:playerd_tables(1 %) max:ifx_ssc(9 %, pid:117), readytorun: 4, pgfault 3413/s (max 3 avg 0.7)
Jan  1 01:00:58 FRITZ kern.err kernel: [   52.850000] [module-alloc-by-name] give 0x2000 bytes at 0x816f1000 to module 'sch_tbf' (0x174000 bytes left)
Jan  1 01:00:58 FRITZ kern.err kernel: [   52.860000] [module-alloc-by-name] 0x2000 bytes used, 0x291c bytes expected
Jan  1 01:00:58 FRITZ kern.err kernel: [   52.950000] [module-alloc-by-name] give 0x3000 bytes at 0x816f3000 to module 'sch_llq' (0x171000 bytes left)
Jan  1 01:00:58 FRITZ kern.err kernel: [   52.960000] [module-alloc-by-name] 0x3000 bytes used, 0x3dc4 bytes expected
Jan  1 01:00:58 FRITZ kern.info kernel: [   52.980000] sch_llq: May  6 2014 18:18:19
Jan  1 01:00:58 FRITZ kern.err kernel: [   53.000000] [module-alloc-by-name] give 0x2000 bytes at 0x816f6000 to module 'sch_sfq' (0x16f000 bytes left)
Jan  1 01:00:58 FRITZ kern.err kernel: [   53.010000] [module-alloc-by-name] 0x2000 bytes used, 0x2c58 bytes expected
Jan  1 01:00:58 FRITZ kern.warn kernel: [   53.570000] [1]system-load 5  loadavg 1.89 0.48 0.16 - 98 tasks:13 % curr:playerd_tables(6 %) max:playerd_tables(6 %, pid:1930), readytorun: 3, pgfault 2888/s (max 3 avg 1.0)
Jan  1 01:00:58 FRITZ user.notice FREETZMOD: Starting inetd ... done.
Jan  1 01:00:58 FRITZ user.notice FREETZMOD: Setting up SSH authorized_keys for root ... done.
Jan  1 01:00:59 FRITZ user.notice FREETZMOD: dropbear is updating inetd ... active.
Jan  1 01:01:01 FRITZ kern.err kernel: [   60.890000] [ppa_proc_unreg_array] remove 31 powersaving is_permanent=0, is_dir=0
Jan  1 01:01:01 FRITZ kern.err kernel: [   60.900000] [ppa_proc_unreg_array] remove 30 mccfg is_permanent=0, is_dir=0
Jan  1 01:01:01 FRITZ kern.err kernel: [   60.910000] [ppa_proc_unreg_array] remove 29 class is_permanent=0, is_dir=0
Jan  1 01:01:01 FRITZ kern.err kernel: [   60.910000] [ppa_proc_unreg_array] remove 28 gamma is_permanent=0, is_dir=0
Jan  1 01:01:01 FRITZ kern.err kernel: [   60.920000] [ppa_proc_unreg_array] remove 27 qos is_permanent=0, is_dir=0
Jan  1 01:01:01 FRITZ kern.err kernel: [   60.930000] [ppa_proc_unreg_array] remove 26 ewan is_permanent=0, is_dir=0
Jan  1 01:01:01 FRITZ kern.err kernel: [   60.930000] [ppa_proc_unreg_array] remove 25 prio is_permanent=0, is_dir=0
Jan  1 01:01:01 FRITZ kern.err kernel: [   60.940000] [ppa_proc_unreg_array] remove 24 qos_tx_dma_descr is_permanent=0, is_dir=0
Jan  1 01:01:01 FRITZ kern.err kernel: [   60.950000] [ppa_proc_unreg_array] remove 23 clk is_permanent=0, is_dir=0
Jan  1 01:01:01 FRITZ kern.err kernel: [   60.960000] [ppa_proc_unreg_array] remove 22 direct_forwarding is_permanent=0, is_dir=0
Jan  1 01:01:01 FRITZ kern.err kernel: [   60.960000] [ppa_proc_unreg_array] remove 21 port6mib is_permanent=0, is_dir=0
Jan  1 01:01:01 FRITZ kern.err kernel: [   61.100000] [ppa_proc_unreg_array] remove 2 eth is_permanent=1, is_dir=1
Jan  1 01:01:01 FRITZ daemon.info ntpd[2473]: listening on 0.0.0.0
Jan  1 01:01:01 FRITZ daemon.info ntpd[2473]: ntp engine ready
Jan  1 01:01:01 FRITZ kern.err kernel: [   61.440000] Re-init AVM Net Common Datapath Driver 7Port Switch ...... 
Jan  1 01:01:01 FRITZ kern.err kernel: [   61.440000] [init_hw] ppe_hw_init=0xff successful
Jan  1 01:01:01 FRITZ kern.err kernel: [   61.450000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown unicast frames 0x48
Jan  1 01:01:01 FRITZ kern.err kernel: [   61.460000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown multicast frames 0x48
Jan  1 01:01:01 FRITZ kern.err kernel: [   61.470000] [reinit_7port_common_eth] Succeeded!
Jan  1 01:01:01 FRITZ kern.info kernel: [   61.500000] lan: port 1(eth0) entering disabled state
Jan  1 01:01:01 FRITZ kern.err kernel: [   61.620000] [module-alloc-by-name] give 0x39000 bytes at 0x816f8000 to module 'ifxmips_ppa_datapath_vr9_a5' (0x136000 bytes left)
Jan  1 01:01:01 FRITZ kern.err kernel: [   61.630000] [module-alloc-by-name] 0x39000 bytes used, 0x3afe4 bytes expected
Jan  1 01:01:01 FRITZ kern.warn kernel: [   61.730000] Loading A5 (MII0/1 + ATM) driver ...... 
Jan  1 01:01:01 FRITZ kern.warn kernel: [   61.730000] loading datapath without dsl hw reset ( avm_dsl_no_init=1 ) 
Jan  1 01:01:02 FRITZ kern.warn kernel: [   62.090000] [avmnet] [avmnet_mcfw_enable] Device eth0 was enabled already
Jan  1 01:01:02 FRITZ kern.warn kernel: [   62.090000] [avmnet] [avmnet_mcfw_enable] Device eth1 was enabled already
Jan  1 01:01:02 FRITZ kern.warn kernel: [   62.090000] [avmnet] [avmnet_mcfw_enable] Device eth2 was enabled already
Jan  1 01:01:02 FRITZ kern.warn kernel: [   62.090000] [avmnet] [avmnet_mcfw_enable] Device eth3 was enabled already
Jan  1 01:01:02 FRITZ kern.err kernel: [   62.090000] [avmnet] [avmnet_mcfw_enable] Device wasp has not been initialised!
Jan  1 01:01:02 FRITZ kern.err kernel: [   62.090000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown unicast frames 0x48
Jan  1 01:01:02 FRITZ kern.err kernel: [   62.110000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown multicast frames 0x48
Jan  1 01:01:02 FRITZ kern.warn kernel: [   62.120000] [ppe_a5_init] Succeeded!
Jan  1 01:01:02 FRITZ kern.warn kernel: [   62.120000] PPE datapath driver info:
Jan  1 01:01:02 FRITZ kern.warn kernel: [   62.120000]   Version ID: 64.3.7.1.0.1.4
Jan  1 01:01:02 FRITZ kern.warn kernel: [   62.120000]   Family    : VR9
Jan  1 01:01:02 FRITZ kern.warn kernel: [   62.130000] [0]system-load 9  loadavg 2.22 0.60 0.20 - 105 tasks:122 % curr:playerd_tables(53 %) max:playerd_tables(53 %, pid:1930), readytorun: 3, pgfault 3467/s (max 0 avg 0.0)
Jan  1 01:01:02 FRITZ kern.err kernel: [   62.180000] userspace registering PID
Jan  1 01:01:02 FRITZ kern.info kernel: [   62.180000] lan: port 1(eth0) entering forwarding state
Jan  1 01:01:02 FRITZ kern.err kernel: [   62.370000] [dma_device_write] auto open tx_chan_no:2
Jan  1 01:01:03 FRITZ kern.warn kernel: [   63.600000] [1]system-load 100 % loadavg 2.22 0.60 0.20 - 103 tasks:29 % curr:wland(5 %) max:playerd_tables(14 %, pid:1930), readytorun: 3, pgfault 2866/s (max 2 avg 2.0)
Jan  1 01:01:03 FRITZ kern.err kernel: [   63.960000] [avmnet] [avmnet_mcfw_enable] Device wasp has not been initialised!
Jan  1 01:01:03 FRITZ kern.info kernel: [   63.960000] ADDRCONF(NETDEV_UP): wasp: link is not ready
Jan  1 01:01:04 FRITZ kern.err kernel: [   64.010000] [module-alloc-by-name] give 0x1a000 bytes at 0x81731000 to module 'aae' (0x11c000 bytes left)
Jan  1 01:01:04 FRITZ kern.err kernel: [   64.020000] [module-alloc-by-name] 0x1a000 bytes used, 0x19368 bytes expected
Jan  1 01:01:04 FRITZ kern.info kernel: [   64.120000] [wlan_config] Given config is:
Jan  1 01:01:04 FRITZ kern.info kernel: [   64.120000] [wlan_config]   hw_interface=0 chip_type=8 (scorpion) offload=3 (full)
Jan  1 01:01:04 FRITZ kern.info kernel: [   64.120000] [wlan_config]   hw_interface=1 chip_type=9 (peregrine) offload=3 (full)
Jan  1 01:01:04 FRITZ kern.info kernel: [   64.120000] [WLAN_HEARTBEAT] start
Jan  1 01:01:04 FRITZ kern.info kernel: [   64.120000] [WLAN_COM] INFO: using dev 'wasp' (src=00:de:ad:be:ef:ca, dst=ff:ff:ff:ff:ff:ff)
Jan  1 01:01:04 FRITZ kern.err kernel: [   64.120000] [WLAN_COM] avm_wlan_com_tx_thread start
Jan  1 01:01:04 FRITZ kern.info kernel: [   64.140000] [wlan_eeprom] Calibration data blocks found = 2
Jan  1 01:01:04 FRITZ kern.info kernel: [   64.140000] [wlan_eeprom] EEPROM #1, type "AR93xx/AR95xx":
Jan  1 01:01:04 FRITZ kern.info kernel: [   64.140000] [wlan_eeprom] Customer data="AVM7490_CAL1_V1"
Jan  1 01:01:04 FRITZ kern.info kernel: [   64.140000] [wlan_eeprom] Old tempSlope2g values found - patching
Jan  1 01:01:04 FRITZ kern.info kernel: [   64.140000] [wlan_eeprom] Build with ART2 4.9
Jan  1 01:01:04 FRITZ kern.info kernel: [   64.150000] [wlan_eeprom] EEPROM #2, type "QCA98xx":
Jan  1 01:01:04 FRITZ kern.info kernel: [   64.150000] [wlan_eeprom] Customer data="AVM7490_CAL2_V1"
Jan  1 01:01:04 FRITZ kern.info kernel: [   64.150000] avm_net_trace: New net trace device 'WLAN Management Traffic' registered with minor 128.
Jan  1 01:01:04 FRITZ kern.info kernel: [   64.180000] ADDRCONF(NETDEV_CHANGE): wasp: link becomes ready
Jan  1 01:01:07 FRITZ kern.err kernel: [   67.090000] [module-alloc-by-name] give 0x1f000 bytes at 0x8174b000 to module 'adf' (0xfd000 bytes left)
Jan  1 01:01:07 FRITZ kern.err kernel: [   67.100000] [module-alloc-by-name] 0x1f000 bytes used, 0x1eaa4 bytes expected
Jan  1 01:01:07 FRITZ kern.err kernel: [   67.210000] [module-alloc-by-name] give 0x4000 bytes at 0x8176a000 to module 'hif_gmac' (0xf9000 bytes left)
Jan  1 01:01:07 FRITZ kern.err kernel: [   67.220000] [module-alloc-by-name] 0x4000 bytes used, 0x43d4 bytes expected
Jan  1 01:01:07 FRITZ kern.warn kernel: [   67.260000] tgt_if =wasp 
Jan  1 01:01:07 FRITZ kern.warn kernel: [   67.260000] mac address  dest -->  0:de:ad:be:ef:ca   
Jan  1 01:01:07 FRITZ kern.warn kernel: [   67.260000]  mac address  src--> ff:ff:ff:ff:ff:ff   
Jan  1 01:01:07 FRITZ kern.warn kernel: [   67.260000]   __gmac_dev_event *************************************
Jan  1 01:01:07 FRITZ kern.warn kernel: [   67.260000]  event 5 name wasp 
Jan  1 01:01:07 FRITZ kern.warn kernel: [   67.260000]  __gmac_dev_event *************************************
Jan  1 01:01:07 FRITZ kern.warn kernel: [   67.260000]  event 1 name wasp 
Jan  1 01:01:07 FRITZ kern.err kernel: [   67.270000] [module-alloc-by-name] give 0x2000 bytes at 0x8176e000 to module 'athlogger' (0xf7000 bytes left)
Jan  1 01:01:07 FRITZ kern.err kernel: [   67.280000] [module-alloc-by-name] 0x2000 bytes used, 0x3128 bytes expected
Jan  1 01:01:07 FRITZ kern.warn kernel: [   67.290000] 
Jan  1 01:01:07 FRITZ kern.warn kernel: [   67.290000] athlogger mode: host
Jan  1 01:01:07 FRITZ kern.err kernel: [   67.300000] [module-alloc-by-name] give 0x4000 bytes at 0x81770000 to module 'fwd' (0xf3000 bytes left)
Jan  1 01:01:07 FRITZ kern.err kernel: [   67.310000] [module-alloc-by-name] 0x4000 bytes used, 0x43c4 bytes expected
Jan  1 01:01:07 FRITZ kern.warn kernel: [   67.330000] FWD:loaded
Jan  1 01:01:07 FRITZ kern.warn kernel: [   67.330000] 
Jan  1 01:01:07 FRITZ kern.err kernel: [   67.360000] [module-alloc-by-name] give 0x23000 bytes at 0x81774000 to module 'atd' (0xd0000 bytes left)
Jan  1 01:01:07 FRITZ kern.err kernel: [   67.370000] [module-alloc-by-name] 0x23000 bytes used, 0x24d4c bytes expected
Jan  1 01:01:07 FRITZ kern.info kernel: [   67.440000] net wasp: firmware: requesting ath_tgt_fw1.fw
Jan  1 01:01:07 FRITZ kern.warn kernel: [   67.450000] FWD:loaded1 over MDIO MAC 0 
Jan  1 01:01:08 FRITZ kern.warn kernel: [   68.070000] FWD:loaded1 
Jan  1 01:01:08 FRITZ kern.warn kernel: [   68.070000] mdio_start_handshake waiting for target to up unit 0
Jan  1 01:01:08 FRITZ kern.warn kernel: [   68.070000] mdio handshake is good 
Jan  1 01:01:08 FRITZ kern.warn kernel: [   68.070000] mdio_block_send exchanging block write parameters 
Jan  1 01:01:08 FRITZ kern.warn kernel: [   68.070000] .
Jan  1 01:01:08 FRITZ kern.warn kernel: [   68.070000] mdio_block_send - start_address 0xbd003000 length 0x00002f24 exec_address 0xbd003000
Jan  1 01:01:08 FRITZ kern.warn kernel: [   68.070000] .Checksum for the file d6b8362d
Jan  1 01:01:08 FRITZ kern.warn kernel: [   68.070000] .....................................................................................................................................................................................................................
Jan  1 01:01:08 FRITZ kern.warn kernel: [   68.320000] Send  waiting for lock
Jan  1 01:01:08 FRITZ kern.warn kernel: [   68.350000] MDIO FWD GOOD  - releasing the lock
Jan  1 01:01:08 FRITZ kern.warn kernel: [   68.350000] total transfer time in jiffies 280
Jan  1 01:01:09 FRITZ kern.warn kernel: [   69.540000] .
Jan  1 01:01:09 FRITZ kern.warn kernel: [   69.540000] HIF GMAC parametrs sent
Jan  1 01:01:09 FRITZ kern.warn kernel: [   69.540000] 
Jan  1 01:01:09 FRITZ kern.warn kernel: [   69.540000] Discovery pkt from  wasp 
Jan  1 01:01:09 FRITZ kern.warn kernel: [   69.540000] 
Jan  1 01:01:09 FRITZ kern.warn kernel: [   69.540000] Start Downloading all images
Jan  1 01:01:09 FRITZ kern.info kernel: [   69.540000] net wasp: firmware: requesting ath_tgt_fw2.fw
Jan  1 01:01:09 FRITZ kern.warn kernel: [   69.650000] Discovery pkt from  wasp 
Jan  1 01:01:09 FRITZ kern.warn kernel: [   69.760000] Discovery pkt from  wasp 
Jan  1 01:01:09 FRITZ kern.warn kernel: [   69.880000] Discovery pkt from  wasp 
Jan  1 01:01:09 FRITZ kern.warn kernel: [   69.990000] Discovery pkt from  wasp 
Jan  1 01:01:10 FRITZ kern.warn kernel: [   70.100000] Discovery pkt from  wasp 
Jan  1 01:01:10 FRITZ kern.warn kernel: [   70.210000] Discovery pkt from  wasp 
Jan  1 01:01:10 FRITZ kern.warn kernel: [   70.300000] Downloading target firmware image	Waiting for Download complete... 
Jan  1 01:01:11 FRITZ kern.warn kernel: [truncated] [   70.320000] .........................................................................................................................................................................................................
Jan  1 01:01:11 FRITZ kern.warn kernel: [   71.090000] Downloading target firmware completed.
Jan  1 01:01:11 FRITZ kern.warn kernel: [   71.090000] 
Jan  1 01:01:11 FRITZ kern.warn kernel: [   71.090000] All images completed.
Jan  1 01:01:13 FRITZ kern.err kernel: [   73.560000] [module-alloc-by-name] give 0x12000 bytes at 0x81797000 to module 'ifxmips_ppa_hal_vr9_a5' (0xbe000 bytes left)
Jan  1 01:01:13 FRITZ kern.err kernel: [   73.570000] [module-alloc-by-name] 0x12000 bytes used, 0x12454 bytes expected
Jan  1 01:01:13 FRITZ kern.err kernel: [   73.610000] [module-alloc-by-name] give 0x15000 bytes at 0x817a9000 to module 'ifx_ppa_mini_sessions' (0xa9000 bytes left)
Jan  1 01:01:13 FRITZ kern.err kernel: [   73.620000] [module-alloc-by-name] 0x15000 bytes used, 0x16c38 bytes expected
Jan  1 01:01:13 FRITZ kern.warn kernel: [   73.650000] Register LANTIQ_PA @ AVM_PA
Jan  1 01:01:13 FRITZ kern.err kernel: [   73.650000] [avm_pa_multiplexer_register_instance] 
Jan  1 01:01:13 FRITZ kern.err kernel: [   73.650000] 	add:avm_pa_add_ifx_session+0x0/0x16c0 [ifx_ppa_mini_sessions] 
Jan  1 01:01:13 FRITZ kern.err kernel: [   73.650000] 	remove:avm_pa_remove_ifx_session+0x0/0x340 [ifx_ppa_mini_sessions]
Jan  1 01:01:13 FRITZ kern.err kernel: [   73.670000] [ifx_ppa_mini_session_init]
Jan  1 01:01:13 FRITZ kern.err kernel: [   73.670000] [ifx_ppa_mini_session_init] avm_pa sessionh_lookup table
Jan  1 01:01:13 FRITZ kern.err kernel: [   73.680000] max_lan_entries       192
Jan  1 01:01:13 FRITZ kern.err kernel: [   73.680000] max_wan_entries       192
Jan  1 01:01:13 FRITZ kern.err kernel: [   73.680000] max_mc_entries        32
Jan  1 01:01:13 FRITZ kern.err kernel: [   73.690000] max_bridging_entries  2048
Jan  1 01:01:13 FRITZ kern.err kernel: [   73.690000] max_ipv6_addr_entries 128
Jan  1 01:01:13 FRITZ kern.err kernel: [   73.690000] max_fw_queue          0
Jan  1 01:01:13 FRITZ kern.err kernel: [   73.700000] max_6rd_entries       4
Jan  1 01:01:13 FRITZ kern.warn kernel: [   73.700000] AVM - Lantiq-PPA: minimalist and slim Session Management: --- init successful
Jan  1 01:01:13 FRITZ kern.warn kernel: [   73.700000] Session-Table Size: 256 * 200 byte = 50 kb
Jan  1 01:01:13 FRITZ kern.err kernel: [   73.720000] [module-alloc-by-name] give 0x2000 bytes at 0x817be000 to module 'ifx_ppa_mini_qos' (0xa7000 bytes left)
Jan  1 01:01:13 FRITZ kern.err kernel: [   73.730000] [module-alloc-by-name] 0x2000 bytes used, 0x28f0 bytes expected
Jan  1 01:01:13 FRITZ kern.warn kernel: [   73.740000] AVM - Lantiq-PPA: minimalist and slim QoS Management: --- init successful
Jan  1 01:01:14 FRITZ user.err dsld[1853]: Sync!!!!!!; vdsl_available=0
Jan  1 01:01:14 FRITZ user.err dsld[1853]: nr=0, dsld.udslinterfaces[nr]=0x44b724, attached=1
Jan  1 01:01:14 FRITZ user.err dsld[1853]: dsl_encap=1, use_dhcp=1
Jan  1 01:01:14 FRITZ user.err dsld[1853]: syncdelaytimer: 3 secs
Jan  1 01:01:14 FRITZ user.err dsld[1853]: sync_group->syncdelaytimer=719749504
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] kdsld: _register_vcc=encap RBE+PPPoE->PPPoE
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] mpoa_setup vcc=8ed85c00, mpoa_type=0, mpoa_mode=1
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000]  
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] mpoa_setup_conn conn=0, mpoa_type=0, mpoa_mode=1
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000]  
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] [sw_tx_queue_add] post_setup
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[0]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[1]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[2]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[3]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[4]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[1]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[2]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[3]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[4]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[5]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[7]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] [sw_tx_queue_add] pre_setup
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[0]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[2]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[3]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[5]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[6]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[7]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] [sw_tx_queue_add] post_setup
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[1]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[2]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[3]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[5]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[6]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[7]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[0]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[1]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[2]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[1]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[6]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[1]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[5]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] [sw_tx_queue_add] post_setup
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[3]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] [sw_tx_queue_add] pre_setup
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[3]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] 	 conn[0].prio_queue_map[7]=0 
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] [sw_tx_prio_to_queue] conn[0].prio_queue_map[2]=2, by vcc_ioctl+0x5bc/0x80c [kdsldmod]
Jan  1 01:01:18 FRITZ kern.err kernel: [   77.750000] [sw_tx_prio_to_queue] conn[0].prio_queue_map[6]=6, by vcc_ioctl+0x5bc/0x80c [kdsldmod]
Jan  1 01:01:18 FRITZ user.err dsld[1853]: !!!!!!!!!!!!!!!!!route_add: default: metric=2, iface=dsl
Jan  1 01:01:18 FRITZ user.err dsld[1853]: udslinterface_set_forwardrules: group=2
Jan  1 01:01:18 FRITZ user.err dsld[1853]: udsliface=0(0x44b724), udsliface->attached=1, udsliface->enabled=1
Jan  1 01:01:18 FRITZ kern.debug kernel: [   78.460000] avm_pa: prioack enable adsl 1048580
Jan  1 01:01:18 FRITZ kern.err kernel: [   78.460000] kdsld: VPN: no vpn connections configured
Jan  1 01:01:18 FRITZ kern.info kernel: [   78.780000] kdsld: internet: set_snd_ipaddr: 79.250.78.251
Jan  1 01:01:18 FRITZ kern.err kernel: [   78.780000] kdsld: avmnet_set_wan_tx_rate_shaping was not successful
Jan  1 01:01:20 FRITZ kern.warn kernel: [   80.630000] ------------[ cut here ]------------
Jan  1 01:01:20 FRITZ kern.warn kernel: [   80.630000] WARNING: at kernel/softirq.c:185 local_bh_enable_ip+0x7c/0xc0()
Jan  1 01:01:20 FRITZ kern.warn kernel: [   80.630000] Modules linked in: ifx_ppa_mini_qos(P) ifx_ppa_mini_sessions ifxmips_ppa_hal_vr9_a5 atd(P) fwd(P) athlogger hif_gmac adf(P) aae(P) ifxmips_ppa_datapath_vr9_a5 sch_sfq sch_llq sch_tbf ulpcmlink(P) kdsldmod(P) dsl_v
Jan  1 01:01:20 FRITZ kern.warn kernel: [   80.630000] Call Trace:
Jan  1 01:01:20 FRITZ kern.warn kernel: [   80.630000] [<80029768>] dump_stack+0x8/0x40
Jan  1 01:01:20 FRITZ kern.warn kernel: [   80.630000] [<8005ff24>] warn_slowpath_common+0x84/0xc0
Jan  1 01:01:20 FRITZ kern.warn kernel: [   80.630000] [<800696bc>] local_bh_enable_ip+0x7c/0xc0
Jan  1 01:01:20 FRITZ kern.warn kernel: [   80.630000] [<8179a4ac>] del_routing_entry+0x12c/0x8a0 [ifxmips_ppa_hal_vr9_a5]
Jan  1 01:01:20 FRITZ kern.warn kernel: [   80.630000] [<817a4a30>] ppa_hal_generic_hook+0xbf0/0x19a0 [ifxmips_ppa_hal_vr9_a5]
Jan  1 01:01:20 FRITZ kern.warn kernel: [   80.630000] [<817a9c58>] ppa_hw_del_session+0x78/0x1c0 [ifx_ppa_mini_sessions]
Jan  1 01:01:20 FRITZ kern.warn kernel: [   80.630000] [<817ac9c4>] avm_pa_remove_ifx_session+0x84/0x340 [ifx_ppa_mini_sessions]
Jan  1 01:01:21 FRITZ kern.warn kernel: [   81.160000] Discovery pkt from  wasp 
May 10 22:52:12 FRITZ daemon.info ntpd[2472]: set local clock to Sat May 10 22:52:12 CEST 2014 (offset 16200d 20h 50m 50.761697s)
May 10 22:52:12 FRITZ kern.info kernel: [   81.290000] [WLAN_COM] INFO: received discovery pkt from 00:03:7f:ff:ff:ff
May 10 22:52:12 FRITZ user.notice FREETZMOD: Starting openntpd ... done.
May 10 22:52:12 FRITZ user.err telefon[1870]: set initial telefon time from linux time to 22:52:12 10.05 2014!
May 10 22:52:12 FRITZ kern.info kernel: [   82.090000] avm_net_trace: New net trace device 'HW (2.4 + 5 GHz, wifi0)' registered with minor 129.
May 10 22:52:13 FRITZ kern.warn kernel: [   82.940000] [1]system-load 2  loadavg 2.8 0.67 0.23 - 108 tasks:18 % curr:stunnel(6 %) max:stunnel(6 %, pid:2975), readytorun: 1, pgfault 1951/s (max 3 avg 2.0)
May 10 22:52:13 FRITZ user.notice FREETZMOD: Starting stunnel ... done.
May 10 22:52:14 FRITZ kern.warn kernel: [   84.050000] Netlink interface number created: 20
May 10 22:52:14 FRITZ kern.warn kernel: [   84.070000] wifi mac address name 0 wifi0  :8:96:d7:61:d7:33 
May 10 22:52:14 FRITZ kern.warn kernel: [   84.070000] wifi mac address name 1 wifi1  :8:96:d7:61:d7:34 
May 10 22:52:14 FRITZ kern.warn kernel: [   84.070000]  __gmac_dev_event *************************************
May 10 22:52:14 FRITZ kern.warn kernel: [   84.070000]  event 5 name wifi0 
May 10 22:52:14 FRITZ kern.warn kernel: [   84.070000]  __gmac_dev_event *************************************
May 10 22:52:14 FRITZ kern.warn kernel: [   84.070000]  event 5 name wifi1 
May 10 22:52:14 FRITZ kern.warn kernel: [   84.070000] __adf_net_register_wpscb: Registerd wps callback for wifi0 
May 10 22:52:14 FRITZ kern.warn kernel: [   84.070000] ATD APPBR Netlink iface number created: 21
May 10 22:52:14 FRITZ kern.info kernel: [   84.120000] [WLAN_HEARTBEAT] sending pings to 00:03:7f:ff:ff:ff
May 10 22:52:15 FRITZ user.notice FREETZMOD: Starting inadyn-mt ... done.
May 10 22:52:15 FRITZ user.notice FREETZMOD: Setting up onlinechanged scripting ... done.
May 10 22:52:15 FRITZ kern.info kernel: [   84.820000] avm_net_trace: New net trace device 'AP (2.4 + 5 GHz, ath0)' registered with minor 131.
May 10 22:52:15 FRITZ kern.info kernel: [   84.830000] avm_net_trace: New net trace device 'AP (2.4 + 5 GHz, ath0)' registered with minor 132.
May 10 22:52:15 FRITZ kern.warn kernel: [   84.870000]  __gmac_dev_event *************************************
May 10 22:52:15 FRITZ kern.warn kernel: [   84.870000]  event 5 name ath0 
May 10 22:52:17 FRITZ user.notice FREETZMOD: Starting Samba-nmbd ... done. Starting Samba-smbd ... done.
May 10 22:52:17 FRITZ kern.warn kernel: [   86.960000]  __gmac_dev_event *************************************
May 10 22:52:17 FRITZ kern.warn kernel: [   86.960000]  event 13 name ath0 
May 10 22:52:18 FRITZ kern.warn kernel: [   87.360000]  __gmac_dev_event *************************************
May 10 22:52:18 FRITZ kern.warn kernel: [   87.360000]  event 1 name ath0 
May 10 22:52:18 FRITZ user.notice FREETZMOD: vsftpd is updating inetd ... active.
May 10 22:52:18 FRITZ kern.info kernel: [   87.550000] device wlan entered promiscuous mode
May 10 22:52:18 FRITZ kern.info kernel: [   87.550000] lan: port 5(wlan) entering forwarding state
May 10 22:52:18 FRITZ user.notice FREETZMOD: Starting wol webinterface ... done.
May 10 22:52:19 FRITZ kern.err kernel: [   88.600000] [module-alloc-by-name] give 0xa000 bytes at 0x817c0000 to module 'usbserial' (0x9d000 bytes left)
May 10 22:52:19 FRITZ kern.err kernel: [   88.610000] [module-alloc-by-name] 0xa000 bytes used, 0xaf44 bytes expected
May 10 22:52:19 FRITZ kern.info kernel: [   88.670000] usbcore: registered new interface driver usbserial
May 10 22:52:19 FRITZ kern.info kernel: [   88.670000] usbserial: USB Serial Driver core
May 10 22:52:20 FRITZ kern.emerg kernel: [   89.550000] [4294946251][0]AVM_WATCHDOG_reboot(hdl=11, faxd): reboot (current: swapper pgfault 0)
May 10 22:52:20 FRITZ kern.emerg kernel: [   89.560000] pagefaults absolut 460980 since last faxd-trigger 248629
May 10 22:52:20 FRITZ kern.emerg kernel: [   89.570000]   hdl= 2 dsl_monitor   pid 1304 triggered before:  12.820 s(avg  23.950 s) state: S cpu: 0 pgfault 0
May 10 22:52:20 FRITZ kern.emerg kernel: [   89.580000]   hdl= 2 dsl_monitor   pid 1310 triggered before:  12.830 s(avg  23.950 s) state: S cpu: 1 pgfault 0
May 10 22:52:20 FRITZ kern.emerg kernel: [   89.590000]   hdl= 3 l2tpv3d       pid 1595 triggered before:   7.590 s(avg   4.230 s) state: S cpu: 0 pgfault 0
May 10 22:52:20 FRITZ kern.emerg kernel: [   89.600000]   hdl= 4 ctlmgr        pid 1603 triggered before:   8.270 s(avg   3.940 s) state: S cpu: 0 pgfault 2
May 10 22:52:20 FRITZ kern.emerg kernel: [   89.610000]   hdl= 4 ctlmgr        pid 1780 triggered before:   8.280 s(avg   3.940 s) state: S cpu: 1 pgfault 2
May 10 22:52:20 FRITZ kern.emerg kernel: [   89.620000]   hdl= 4 ctlmgr        pid 1781 triggered before:   8.290 s(avg   3.940 s) state: S cpu: 1 pgfault 2
May 10 22:52:20 FRITZ kern.emerg kernel: [   89.630000]   hdl=13 upnpd         pid 1606 triggered before:   8.030 s(avg   2.840 s) state: S cpu: 0 pgfault 0
May 10 22:52:20 FRITZ kern.emerg kernel: [   89.640000]   hdl=13 upnpd         pid 2551 triggered before:   8.040 s(avg   2.840 s) state: S cpu: 1 pgfault 0
May 10 22:52:20 FRITZ kern.emerg kernel: [   89.650000]   hdl=13 upnpd         pid 2552 triggered before:   8.050 s(avg   2.840 s) state: S cpu: 0 pgfault 0
May 10 22:52:20 FRITZ kern.emerg kernel: [   89.660000]   hdl=10 multid        pid 1807 triggered before:   5.120 s(avg   4.900 s) state: S cpu: 0 pgfault 0
May 10 22:52:20 FRITZ kern.emerg kernel: [   89.670000]   hdl= 5 ddnsd         pid 1819 triggered before:   3.780 s(avg   4.350 s) state: S cpu: 0 pgfault 0
May 10 22:52:20 FRITZ kern.emerg kernel: [   89.680000]   hdl= 6 upnpdevd      pid 1825 triggered before:   3.420 s(avg   4.160 s) state: S cpu: 1 pgfault 0
May 10 22:52:20 FRITZ kern.emerg kernel: [   89.690000]   hdl= 7 dsld          pid 1853 triggered before:   0.920 s(avg   4.450 s) state: S cpu: 1 pgfault 1
May 10 22:52:20 FRITZ kern.emerg kernel: [   89.710000]   hdl= 8 pbd           pid 1866 triggered before:  41.470 s(avg   0.120 s) state: S cpu: 0 pgfault 0
May 10 22:52:20 FRITZ kern.emerg kernel: [   89.730000]   hdl= 9 telefon       pid 1870 triggered before:  40.540 s(avg   0.560 s) state: S cpu: 0 pgfault 0
May 10 22:52:20 FRITZ kern.emerg kernel: [   89.750000]   hdl=12 voipd         pid 1889 triggered before:   9.860 s(avg   3.260 s) state: S cpu: 0 pgfault 0
May 10 22:52:20 FRITZ kern.emerg kernel: [   89.770000] ar7wdt_hw_reboot: kernel context for all blocked tasks:
May 10 22:52:20 FRITZ kern.info kernel: [   89.770000] ifx_ssc       D 80325168     0   117      2 0x00100000
May 10 22:52:20 FRITZ kern.warn kernel: [   89.770000] 	  00000003 00000001 8fba4600 8f8d2600 806f2990 80715a80 00000000 8fba4744
May 10 22:52:20 FRITZ kern.warn kernel: [   89.770000] 	  8fba4600 8fba4744 80700000 80081a40 00000000 00000000 00000000 00000000
May 10 22:52:20 FRITZ kern.warn kernel: [   89.770000] 	  ...
May 10 22:52:20 FRITZ kern.warn kernel: [   89.770000] [<80325168>] ifx_ssc_kthread+0xc8/0x1a0
May 10 22:52:20 FRITZ kern.warn kernel: [   89.770000] 
May 10 22:52:21 FRITZ kern.warn kernel: [   91.100000] 
May 10 22:52:21 FRITZ kern.warn kernel: [   91.100000] Target Reset Magic Patteren set in MDIO_REGS[]={0x3a3b, 0x3c3d, 0x3e3f, 0x4a4b, 0x4c4d, 0x4e4f, 0x5a5b, 0x5c5d, }
May 10 22:52:23 FRITZ daemon.info hostapd: ath0: STA 08:96:d7:0c:8e:bc IEEE 802.11: associated
May 10 22:52:24 FRITZ daemon.info hostapd: ath0: STA 08:96:d7:0c:8e:bc WPA: pairwise key handshake completed (RSN)
Jan  1 01:00:43 FRITZ daemon.info dnsmasq[1758]: started, version 2.70 cachesize 150
Jan  1 01:00:43 FRITZ daemon.info dnsmasq[1758]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset auth no-DNSSEC
Jan  1 01:00:43 FRITZ daemon.info dnsmasq[1758]: asynchronous logging enabled, queue limit is 10 messages
Jan  1 01:00:43 FRITZ daemon.info dnsmasq-dhcp[1758]: DHCP, IP range 192.168.1.100 -- 192.168.1.200, lease time 12h
Jan  1 01:00:43 FRITZ daemon.info dnsmasq[1758]: using nameserver 141.1.27.249#53
Jan  1 01:00:43 FRITZ daemon.info dnsmasq[1758]: using nameserver 8.8.4.4#53
Jan  1 01:00:43 FRITZ daemon.info dnsmasq[1758]: read /etc/hosts - 16 addresses
Jan  1 01:00:43 FRITZ daemon.info dnsmasq-dhcp[1758]: read /etc/ethers - 14 addresses
May 10 22:52:24 FRITZ daemon.info dnsmasq-dhcp[1758]: DHCPDISCOVER(lan) 08:96:d7:0c:8e:bc 
May 10 22:52:24 FRITZ daemon.info dnsmasq-dhcp[1758]: DHCPOFFER(lan) 192.168.1.9 08:96:d7:0c:8e:bc 
May 10 22:52:24 FRITZ daemon.info dnsmasq-dhcp[1758]: DHCPDISCOVER(lan) 08:96:d7:0c:8e:bc 
May 10 22:52:24 FRITZ daemon.info dnsmasq-dhcp[1758]: DHCPOFFER(lan) 192.168.1.9 08:96:d7:0c:8e:bc 
May 10 22:52:24 FRITZ daemon.info dnsmasq-dhcp[1758]: DHCPREQUEST(lan) 192.168.1.9 08:96:d7:0c:8e:bc 
May 10 22:52:24 FRITZ daemon.info dnsmasq-dhcp[1758]: DHCPACK(lan) 192.168.1.9 08:96:d7:0c:8e:bc Repeater
May 10 22:52:24 FRITZ daemon.err dnsmasq-dhcp[1758]: failed to write/to update /var/tmp/multid.leases: Permission denied

Anhänge (2)

config.txt (57.2 KB) - hinzugefügt von Norelkhan vor 4 Jahren.
.config
config.2.txt (61.0 KB) - hinzugefügt von Norelkhan vor 4 Jahren.

Alle Anhänge herunterladen als: .zip

Änderungshistorie (9)

Geändert vor 4 Jahren durch Norelkhan

.config

comment:1 Geändert vor 4 Jahren durch Norelkhan

Das Problem besteht auch noch bei Labor 28463.

Beim Kompilieren kommt folgende Warnung:

unresolved symbol avm_event_build_id_mask in file /lib/modules/2.6.32.61/kernel/drivers/mei/mei_vr9.ko
unresolved symbol avm_event_build_id_mask in file /lib/modules/2.6.32.61/net/aae.ko
WARNING: Unresolved symbols detected, not all AVM-features may work.
No current sources by AVM? Error in kernel's .config?

Wenn das an fehlenden Sourcen liegt bitte ich um eine kurze Bestätigung, damit ich (und bestimmt viele andee) nicht verzweifelt versuchen, eine Labor ans Laufen zu bringen.

Dann heißt es eben warten, bis Sourcen verfügbar sind.

Geändert vor 4 Jahren durch Norelkhan

comment:2 Geändert vor 4 Jahren durch er13

Wegen failed to write/to update /var/tmp/multid.leases: Permission denied schaue Dir diesen Comment an, da war ein User-Fehler die Ursache.

Was die Ursache dafür

Jan  1 01:01:18 FRITZ kern.err kernel: [   78.780000] kdsld: avmnet_set_wan_tx_rate_shaping was not successful
Jan  1 01:01:20 FRITZ kern.warn kernel: [   80.630000] ------------[ cut here ]------------
Jan  1 01:01:20 FRITZ kern.warn kernel: [   80.630000] WARNING: at kernel/softirq.c:185 local_bh_enable_ip+0x7c/0xc0()
Jan  1 01:01:20 FRITZ kern.warn kernel: [   80.630000] Modules linked in: ifx_ppa_mini_qos(P) ifx_ppa_mini_sessions ifxmips_ppa_hal_vr9_a5 atd(P) fwd(P) athlogger hif_gmac adf(P) aae(P) ifxmips_ppa_datapath_vr9_a5 sch_sfq sch_llq sch_tbf ulpcmlink(P) kdsldmod(P) dsl_v
Jan  1 01:01:20 FRITZ kern.warn kernel: [   80.630000] Call Trace:
Jan  1 01:01:20 FRITZ kern.warn kernel: [   80.630000] [<80029768>] dump_stack+0x8/0x40
Jan  1 01:01:20 FRITZ kern.warn kernel: [   80.630000] [<8005ff24>] warn_slowpath_common+0x84/0xc0
Jan  1 01:01:20 FRITZ kern.warn kernel: [   80.630000] [<800696bc>] local_bh_enable_ip+0x7c/0xc0
Jan  1 01:01:20 FRITZ kern.warn kernel: [   80.630000] [<8179a4ac>] del_routing_entry+0x12c/0x8a0 [ifxmips_ppa_hal_vr9_a5]
Jan  1 01:01:20 FRITZ kern.warn kernel: [   80.630000] [<817a4a30>] ppa_hal_generic_hook+0xbf0/0x19a0 [ifxmips_ppa_hal_vr9_a5]
Jan  1 01:01:20 FRITZ kern.warn kernel: [   80.630000] [<817a9c58>] ppa_hw_del_session+0x78/0x1c0 [ifx_ppa_mini_sessions]
Jan  1 01:01:20 FRITZ kern.warn kernel: [   80.630000] [<817ac9c4>] avm_pa_remove_ifx_session+0x84/0x340 [ifx_ppa_mini_sessions]

ist und wie man das beheben kann, kann ich nicht sagen. In jedem Fall startet die Labor auf meiner Test-7490 ohne Probleme.

comment:3 Geändert vor 4 Jahren durch Cas1711

Hi er13,
starten tut die 7490 schon, das Problem tritt auf wenn man per GUI auf die Telefon Einstellungen zugreift.
Sind in der Test-7490 Tel. Endgeräte eingerichtet ( ich hatte DECT und Fritz.APP Fon eingerichtet sowie eine VoiP + ISDN Nr.) ?
Der Fehler kam dann jeweils nach dem ersten Reboot der 7490.
Ich hatte vorher ein Recover laufen lassen und dann auf die Labor upgedatet, alte Settings sollten also nicht hereinfunken.

comment:4 Geändert vor 4 Jahren durch CarstenSchuette

(gelöscht, falsches Ticket, sorry)

Zuletzt geändert vor 4 Jahren von CarstenSchuette (vorher) (Diff)

comment:5 Geändert vor 4 Jahren durch CarstenSchuette

Das Ticket wäre eine Dublette zu ticket:2499, wenn es hier auch darum geht, dass die Box beim Zugriff auf die Telefonieeinstellungen rebootet. Das sieht für mich aber nach einem anderen Problem aus….

Zuletzt geändert vor 4 Jahren von CarstenSchuette (vorher) (Diff)

comment:6 Geändert vor 4 Jahren durch er13

@Cas1711, Carsten: das Problem hier ist ein anderes und hat nichts mit #2499 zu tun.

comment:7 Geändert vor 13 Monaten durch er13

  • Meilenstein von freetz-future nach freetz-next geändert
Hinweis: Hilfe zur Verwendung von Tickets finden Sie in TracTickets.